Electrician in Independence, MO, Certified Master Since 1997
Local H Electric is a family-run electrician serving Independence, MO. Todd M. Harlow has held Independence’s own Master Electrician’s Certificate of Qualification since January 1997. Panel upgrades, repairs and EV chargers for Independence homes, permitted to the 2023 code the city inspects to.
From an Independence Customer
5.0★ on Google across 132 reviews. These are from jobs in Independence.
I had 4 light fixtures that didn't work. Local H Electric was able to diagnose and replace for a fair price, and completed the job the same day. They even went above and beyond, by adding a spacer to cover the wall where the new smaller fixture didn't quite cover. They were professional, efficient and I would highly recommend.
Needed flittering lights repaired in dining! The repair person quickly identified the problem obtained parts fixed switch! Consequently decided that wanted some other fixtures replaced! Was very efficient and punctual! Would definitely use again! He also made suggestions about lights!
The Truman Home on North Delaware Street is a Victorian, and in Independence it has plenty of company. In Fairmount, more than half the homes were built in 1939 or earlier. Houses that age were wired for a few lights and a radio; today they're carrying central air, a microwave and sometimes a car charger on the same service.
Electrician Services in Independence, MO
These are the jobs Independence homeowners call us for most. Each one links to the page that explains it.

Electrical panel replacement in Independence
Failed breakers and burned lugs repaired; Federal Pacific, Zinsco and undersized panels replaced.
Costs in Independence
Electrical wiring in Independence
Rewiring and grounding for the Victorians near the Square and the pre-1940 homes in Fairmount and Englewood.
Details
EV charger installation in Independence
Level 2 chargers with the panel checked for room. Independence Power & Light serves the city, so the Evergy rebate does not apply here.
Costs in Independence
Commercial & tenant finish in Independence
Tenant finish around the Square, from service work to new circuits for a fit-out.
Details
Lighting installation in Independence
Fixtures and recessed lighting inside — soffit and landscape lighting outside.
Costs in Independence
Electrical repair in Independence
Tripping breakers, dead circuits and flicker, from pre-war Fairmount wiring to the service drop at the meter. Fault found first, then a flat price.
Costs in Independence
Ceiling & attic fans in Independence
Ceiling fans hung on a box rated for them, and attic and bath fans that actually move air.
Details
Outlets & switches in Independence
New circuits and grounded outlets for older homes around Fairmount and Englewood.
Details
Emergency service in Independence
Reachable 24/7 — and honest about whether it can wait until morning.
Call nowElectrical panel repair
The calls start with a smell of hot plastic at the panel, a breaker that will not stay on, or a home inspector's note about a double tap. We take the cover off and look at the bus and the main lugs before naming a price, because once the bus is scorched, a repair is money spent on a panel that is still failing. Replacement is covered on our page for electrical panel replacement in Independence, with what moves the price.
Panel replacement and service upgrades
A fuse box, or a 60 amp panel with no room left, is the usual starting point. A service upgrade is the meter socket, the service entrance and the grounding along with the panel, and the city inspects it before it is finished. We give you the outage window and the inspection date before the day.
Electrical repair
When lights dim across the whole house at once, rather than on one circuit, the trouble can be on the utility side of the meter, and then it is the utility's to fix, not yours to pay for. We check that first. A problem on one circuit is traced from the panel outward. What a repair usually runs is on our Independence repair page.
EV charger installation
A Level 2 charger is a 240 volt circuit of its own, and in an older house the first question is whether the panel has room. A 240 volt garage outlet now needs ground-fault protection, and some chargers trip it, so a hardwired charger is often the cleaner install. We help you choose between the two before the car arrives.
Lighting installation
The usual lighting surprise is the switch box: in older houses it rarely has a neutral wire, which smart dimmers need. Plaster ceilings have to be cut carefully, with wood lath behind them, and recessed lights go in after we check the joists and what sits above them. Our Independence lighting page covers older ceilings in more detail.
Commercial electrician work
Around the Square, a fit-out often starts in a building older than any of its tenants, so the first visit traces what earlier ones left in the walls. The city also inspects commercial work under the 2024 International Building Code, so a fit-out is priced to the code its permit falls under.
Rewiring older homes
Signs a house is due: fuses or breakers that trip when two appliances run at once, outlets with two slots and no ground, and fabric-covered wire visible in the basement. A rewire runs through the basement and attic wherever possible so the plaster is opened as little as possible, and each new circuit gets the arc-fault and ground-fault protection current code calls for.
Common Questions from Independence Homeowners
How soon can you get to a job in Independence?
Our home base is in Kansas City's Northland, about 18 miles from Independence. Emergencies are answered any hour and we come the same day. For everything else we usually have a Independence slot within the week; call or text and we'll give you a day and a time, not a window.
Do you offer emergency electrical service in Independence?
Yes — for electrical issues in Independence that can't wait, call us any time, day or night. We're a small, family-run business, so a real member of our team picks up.
Is your master electrician certified in Independence?
Yes. Todd M. Harlow holds a Master Electrician’s Certificate of Qualification from Independence’s own Board of Electrical Examiners, issued in January 1997 and held ever since. Independence certifies electricians through that board, so it is the city’s own credential, and a fair thing to ask anyone before they open your panel. A scan of the certificate is on our About page.
Who supplies power in Independence?
Independence Power & Light, the city's own utility, serves almost every home in town, so service upgrades are scheduled with IPL rather than Evergy.
Which electrical code does Independence inspect to?
The 2023 National Electrical Code. Kansas City is still on the 2017 edition, so a panel replaced in Independence can need arc-fault and ground-fault protection that the same job in Kansas City would not.
Can my panel be repaired, or does it need replacing?
Often it can be repaired: a failed breaker, a loose or burned lug, or a double-tapped breaker a home inspector flagged. When the bus bars are burned, or the panel is a Federal Pacific or Zinsco, replacement is the honest answer. We tell you which before quoting.
Do you do commercial electrical work in Independence?
Yes: service calls, new circuits and tenant finish for shops and offices, including the older buildings around the Square. The work is permitted and inspected through the city. We are a family-run crew of four or five, so we take one commercial space at a time and finish it.
Does the Evergy EV charger rebate apply in Independence?
No. Evergy's rebate is only for Evergy customers, and almost every home in Independence buys its power from the city instead, so plan a charger's budget without it.
Nearby Towns We Serve
Call, text, or send us a photo.
Emergencies get answered any hour, and we usually answer quote requests the same day.